1800 022 122
Miami Stainless | Balustrade, Shade, Marine, Structure Hardware
Your shopping cart is empty!

Categories

Tensioner Swage Stud System

Our Tensioner Swage Stud System is a popular streamline stainless steel wire balustrade system that passes through both sides of a post. Available to suit both timber and metal posts, the Tensioner Swage Stud System is perfect for single straight or stair sections. Please Note: It is not recommended this system be used where corners exist unless the intersecting wires are offset.

 

To install the Tensioner Swage Stud System, drill through your posts, feed the Swage Stud end of the pre-swaged wire through the finishing post and any intermediate posts then through the starting post and fasten the Tensioner to create the required tension.

 

To order, simply measure the outside distance between the starting and finishing points of your posts and provide them to Miami Stainless either through our online Balustrade Builder or contact us directly via phone, fax or email. Your wires will arrive to your door pre-swaged to your exact measurements for a very quick and simple installation.

Please Note: This method is suitable for both timber and metal posts. It is recommended that you use a standard flat washer on each outside face of your posts when installing this system with timber posts.

Read FAQ and learn more about the Tensioner Swage Stud System here.

Display:

List
Show:
Sort By:
Drill Bit 9.0mm Sutton Viper
Drill Bit 9.0mm Sutton ViperDVP-090
Drill Bit 9.0mm Sutton Viper Miami Stainless range of Sutton Viper Drill Bits are made from High ..

Factory Hydraulic Swaging
Factory Hydraulic SwagingLC4
Miami Stainless factory swaging provides the cleanest and strongest connection between the stainle..

Hex Head Tensioner 6mm ProRig AISI 316
Hex Head Tensioner 6mm ProRig AISI 316S7500-06PR
Hex Head Tensioner 6mm ProRig AISI 316 Miami Stainless AISI 316 stainless steel 5mm Econ Hex ..

Rod Terminal 35mm x 6.2mm suits 3.2mm Wire
Rod Terminal 35mm x 6.2mm suits 3.2mm WireS7806-0303PR
Rod Terminal 35mm x 6.2mm suits 3.2mm Wire ProRig AISI 316 Miami Stainless 35mm x 6.2mm Rod T..

Swage Stud suits 3.2mm wire M6 x 40 RHT
Swage Stud suits 3.2mm wire M6 x 40 RHTS7801R-030640PR
Swage Stud suits 3.2mm wire M6 x 40mm RHT ProRig AISI 316 Miami Stainless Swage Terminals, a..

Drill Bit 7.5mm Sutton Viper
Drill Bit 7.5mm Sutton ViperDVP-075
 Drill Bit 7.5mm Sutton Viper 7.5mm drill bits are perfect for allowing the Swage Stud to pas..

Peek Polish 100ml
Peek Polish 100mlPEEK-100
Peek Polish 100ml Peek Polish range is a highly concentrated formula which removes tarnish, heat ..

Wire Rope 3.2mm 1x19 ProRig AISI 316 per Metre
Wire Rope 3.2mm 1x19 ProRig AISI 316 per MetreW03.2119M
Wire Rope 3.2mm 1 x 19 ProRig AISI 316 PER METRE Miami Stainless supplies an ultra-high quality&n..

Payment Methods Miami Stainless is a Member of