1800 022 122
Miami Stainless | Balustrade, Shade, Marine, Structure Hardware
Your shopping cart is empty!

Post Builder

Choose Post TypeClick to edit

Square

Square

Round

Round

Flat/RHS

Flat_RHS

Glass

Glass
The posts made using the Post Builder have a standard height of 960mm. If you require a custom height post, contact Miami Stainless.
Visit the Post Builder Information Section prior to using the Post Builder.

Choose Post StyleClick to edit

Square

Square

Round

Round

Choose PostClick to edit

End

End
Wall thickness = 3.0mm.

Corner

Corner
Wall thickness = 3.0mm.

Intermediate

Intermediate
Wall thickness = 1.6mm.
Choose 1" or 2" post size

40mm x 5mm

40mm x 5mm Flat bar
40 x 5 Flat Bar is only available in Satin Finish.

50mm x 10mm

50mm x 10mm Rectangular Satin Finish
50 x 10 Rectangular Hollow Section (RHS) in Satin Finish.

50mm x 10mm

50mm x 10mm Rectangular Mirror Polish
50 x 10 Rectangular Hollow Section (RHS) in Mirror Polish.

Choose Handrail TypeClick to edit

Flat

Round

Choose Post ApplicationClick to edit

Straight Section

Angled(stairs)

°

Enter Degree of Angle

stairs
Measure the angle between the bottom landing and underside of stairs.

Choose Post FinishClick to edit

Matte Satin

Matte Satin

Mirror Polish

Mirror Polish

Choose Measurement TypeClick to edit

NCC Regulations

Height to Underside of Handrail = 960mm

Number of Wires = 11

Hole Spacing = 80mm

Please choose Custom if you require different measurements.

Height to Underside of Handrail = 960mm

Number of Wires = 9

Hole Spacing = 80mm

If on stairs, your post must be positioned in the middle of stair tread.

Custom

Post with 960mm height to underside of handrail only, with custom hole spacing options.

Enter Hole SpacingClick to edit

mm

Enter Spacing in (mm)

hole spacing

Enter hole spacing by measuring from centre to centre of holes.

Enter First Hole Position From TopClick to edit

mm

Enter Spacing in (mm)

hole position From Top

Enter first hole position by measuring from centre of first hole to underside of handrail from centre to centre of holes.

Enter 200mm if you are using standard hole configuration.

Enter Hole Position From BottomClick to edit

mm

Enter Spacing in (mm)

hole number

Enter bottom hole position by measuring from the centre of hole to ground.

Enter 200mm if you are using standard hole configuration.

Enter Number of HolesClick to edit

Enter Number of Holes

hole number

Do You Require Blind Nut Rivet Installation?Click to edit

Yes

Miami Stainless can insert blind nut rivets into posts to save you time on installation and eliminate the need for a nut rivet tool.

Balustrade systems for metal posts that require blind nut rivets include:

  • Jaw Swage Bottlescrew
  • Jaw Swage Bottlescrew with Flip Toggle
  • Nutsert Swage Stud
  • Nutsert Tension Rod

This service cost retails at $1.50 per blind nut.

No

Blind Nut Rivet SizeClick to edit

M6

M6 nutserts suit a hole size of 10mm and are required for the following balustrade systems:

  • Jaw Swage Bottlescrew
  • Jaw Swage Bottlescrew with Flip Toggle
  • Nutsert Swage Stud

M8

M8 nutserts suit a hole size of 11mm and are required for the following balustrade system:

  • Nutsert Tension Rod

Blind Nut Rivet SizeClick to edit

Standard Rivet Size

Choose the Miami Stainless balustrade system you will be using:

Metal Post Systems
Nutsert Swage Stud
Nutsert Tension Rod
Standard DIY (M)
Tensioner Swage Stud (M)
Jaw Swage Bottlescrew (M)
Jaw Swage Flip Toggle
Tensioner Swage Flip Toggle

Timber Post Systems
Insert Swage Stud
Insert Tension Rod
Standard DIY (T)
Tensioner Swage Stud (T)
Jaw Swage Bottlescrew (T)
Lag Swage Bottlescrew
Lag Screw Swage

Custom

Enter a custom blind nut rivet size.

Enter Quantity RequiredClick to edit

Left (LHT)

Enter Quantity

This type is used in a Nutsert Swage Stud balustrade system.

Right (RHT)

Enter Quantity

This type suits most balustrade systems.

Choose Hole SizeClick to edit

4.0mm

This size is commonly used when hydraulically swaging on-site.

7.5mm

This size is used for all pre-swaged balustrade systems.

8.73mm

This size is used when inserting grommets into posts.

10.0mm

A 10mm hole should only be drilled if inserting M6 blind nut rivets yourself.

11.0mm

An 11mm hole should only be drilled if inserting M8 blind nut rivets yourself.

9.5mm

This size is used when inserting RHS grommets into posts.

Choose Hole SizeClick to edit

Standard Hole Size

Choose the Miami Stainless balustrade system you will be using:

Metal Post Systems
Nutsert Swage Stud
Nutsert Tension Rod
Standard DIY (M)
Tensioner Swage Stud (M)
Jaw Swage Bottlescrew (M)
Jaw Swage Flip Toggle
Tensioner Swage Flip Toggle

Timber Post Systems
Insert Swage Stud
Insert Tension Rod
Standard DIY (T)
Tensioner Swage Stud (T)
Jaw Swage Bottlescrew (T)
Lag Swage Bottlescrew
Lag Screw Swage

Custom

Enter a custom hole size.

Enter Hole SizeClick to edit

mm

Enter Size in (mm)

Enter 11mm if using Miami Stainless M8 8mm blind nut rivets.

Are you inserting Grommets?Click to edit

Yes

We will adjust the hole size as required to allow you to insert grommets.

No



Payment Methods Miami Stainless is a Member of