ProRig Original Design Flip Toggle Systems

The ProRig Original Design Flip Toggle Systems are the newest, most streamline way of fitting stainless steel wire balustrade to metal posts.  You can use the ProRig Flip Toggle in conjunction with a number of other stainless steel wire balustrade systems including the Jaw Swage Bottlescrew System for stairs or ramp sections.

Simply hand swage the ProRig Flip Toggle fittings on the wire with a Hex Swaging Tool, drill a 6.0mm hole in one side of your metal post, insert the ProRig Flip Toggle and pull back stainless steel wire.  The Flip Toggle will lock into place allowing you to create the required tension from the other end of the span.

To order, simply measure the distance from inside post to inside post between the starting and finishing points of your posts and provide them to Miami Stainless either through our online Balustrade Builder or contact us directly via phone, fax or email. Your wires will arrive to your door pre-swaged to your exact measurements for a very quick and simple installation.

For instant online balustrade quotes CLICK HERE

 

Please Note: This method is only suitable for metal posts.

 

FAQ About This Method

 

Can I install this method myself? Yes, even someone with no experience can easily install all our wire balustrade systems.

 

Do I need any special tools? The ProRig Flip Toggle arrives at your door already swaged ready for quick installation!  You will only require common handyman tools such as an electric drill and drill bits which are available from Miami Stainless if required.  Simply check out the related products section at the bottom of each product page or contact us for more information.

 

What size and type of stainless steel wire do I use? Because the ProRig Flip Toggle is used in conjunction with most other wire balustrade systems, 3.2mm 1 x 19 stainless steel wire is almost always selected. This wire is the most functional for stainless steel wire balustrade systems due to its bright surface finish, attractive appearance, durability, strength and low stretch.

 

What spacing do I need between my wires? When using 3.2mm 1 x 19 stainless steel wire, you will usually need 80mm spacing (usually 11 runs) between your wires when using a standard one (1) meter high handrail. Please click here for more information on the current NCC Wire Balustrade Regulations.

 

Can I use this balustrade system on a stair or angled section? Yes, the ProRig Flip Toggle can be used on a stair or angled section as long as the opposite end also suits a stair or angled section such as the Jaw Swage BottleScrew System or Tensioner Swage Stud System with Beveled Washers.

 

What size pilot hole should I drill for the ProRig Flip Toggle ? You will require a 6.0mm pilot hole in one side of your metal post.

 

What is the maximum length run I can do? Most ProRig Flip Toggle systems can easily span up to 10 meters.

 

What size hole should I drill through my intermediate posts? A 4.0mm hole through your intermediate posts will allow the stainless steel wire to pass through and a 7.5mm hole will allow any pre-swaged Swage Studs to pass through. Please note: If you are using grommets, the required drill size is 11/32".

 

Can I take my balustrade wire around corners? Miami Stainless highly recommends that you do not bend your wire around corners; this can fatigue the wire, put excessive stress on your posts, and make it difficult to get the required tension on your wire to meet NCC Regulations.

 

Can I use this method if I have timber posts? No, however we have a number of different wire balustrade systems to suit timber posts.  Please click on the links above to learn more about each wire balustrade system.

 

Can I use this method if I have metal posts? Yes, the ProRig Flip Toggle is specifically designed for metal posts.

 

What do I need to get a quote? To get a free, no obligation quote you will need to know how many sections you require and the length of each section. You will also need the height of your handrail between your decking or platform and the underside of your handrail.  You can use the Miami Stainless Balustrade Builder to compare different wire balustrade systems at your convenience or contact us directly.

 

How do I order? Simply follow the steps using the Miami Stainless Balustrade Builder and make a secure payment by credit card or you can contact us directly.

 

If you contact Miami Stainless directly we require your exact measurements from the inside to inside face of your posts to be supplied in writing.  You can provide these measurements by email or fax. At this time payment is required which can be made by either credit card over the phone or by EFT. When making payment by EFT, please email or fax your payment remittance with invoice number to make sure your items are not delayed. Please note: For security reasons, please do not email your credit card details.

 

How much will freight cost me and when can I expect delivery? The Jaw Swage Bottlescrew System is usually dispatched within 3 full working days* after full payment is received.

Free delivery for orders over $500 excl GST. *Exclude Western Australia, Nothern Territory and Tasmania - $40 flat fee. Bulky, oversize, or overweight packages may incur extra freight charges. Delivery charges exclude handrail tube – price on application. Delivery times may vary.

Please note: Miami Stainless offers an Air Freight service for packages under 5kg.  Please contact us for further information.

 

Please keep up-to-date with Miami Stainless news by signing up for our e-newsletter at the link below.

 

*While Miami Stainless endeavors to make sure all stainless steel wire balustrade systems are dispatched within 3 full working days, during busy times such as leading into Christmas, we can experience a high work-load and delays. 

 

Destination	Approximate Delivery Time
Queensland	1 2 full working days
New South Wales	1 2 full working days
Australian Capital Territory	1 2 full working days
Victoria	2 3 full working days
South Australia	2 3 full working days
Tasmania	5 6 full working days
Northern Territory	6 7 full working days
Western Australia	6 7 full working days

*Miami Stainless cannot guarantee freight delivery times

 

What should I do if I have any further questions? If you have any further questions please contact Miami Stainless directly on 1800 022 122 or by email, [email protected] and one of our friendly staff will be happy to help.