- Blinds & Awnings
- Catenary Lighting
- Fasteners
-
General Hardware
- Fasteners
- Fixing Plates
- Chain
- Shackles
- Cleaning & Protection
- Hinges
- Eye Bolts
- Eye Nuts
- Cafe Blind Anchor Housing
- Blind and Awning
- Flush Ring Pulls
- Guy Wire Kit
- U Bolts
- Hooks & Snaps
- Links
- Lockwire
- Mame Blocks
- Pulley Blocks
- Rings
- Ropes
- Rigging Screw/Bottlescrew
- Screw Eyes
- Sheaves, Nylon Pulley Wheels
- Stayput Fittings
- Swage Sleeves/Ferrules
- Swage Terminals
- Thimbles
- Threaded Rod
- Toggle Bolts
- Turnbuckles
- Wall Plates
- Wire Rope Grips
- Glass Balustrade
- Green Wall
- Marine
- Handrail
- Height Safety
- Kits
- Posts
- Shade Sail
- Tools
-
Wire Balustrade
- Architectural Ball
- Bevelled Washers
- Blind Nut Rivets/Nutserts
- Clean, Protect & Polish
- Eye Bolts
- Grommets
- Hex Head Tensioners
- Lag Screws
- Net Clip
- Balustrade Kits
- Rigging Screw/Bottlescrew
- Saddles/Eye Straps
- Screw Eyes
- Swage Sleeves/Ferrules
- Swage Terminals
- Stainless Steel Balustrade
- Thimbles
- Stainless Steel Wire Balustrade
- Threaded Forks
- Threaded Inserts
- Vertical Wire Balustrade
- Turnbuckles
-
Wire Balustrade Systems
- Blue Wave Swageless System For Metal Posts
- Blue Wave Swageless System For Timber Posts
- Econ Insert Swage Stud System For Timber Posts
- Econ Jaw Swage Bottlescrew System for Metal Posts
- Econ Jaw Swage Bottlescrew System for Timber Posts
- Econ Lag Screw Swage System
- Econ Lag Swage Bottlescrew System
- Econ Nutsert Swage Stud System For Metal Posts
- ProRig Insert Swage Stud System
- ProRig Insert Swage Stud System For Timber Stairs
- ProRig Insert Tension Rod System (requires a swaging tool)
- ProRig Jaw Swage Bottlescrew System for Metal Posts
- ProRig Jaw Swage Bottlescrew System for Timber Posts
- ProRig Jaw Swage Bottlescrew System with Flip Toggle
- ProRig Jaw Swage Bottlescrew System With Saddles - Metal Posts
- ProRig Jaw Swage Bottlescrew System With Saddles - Timber Posts
- ProRig Nutsert Swage Stud System
- ProRig Nutsert Swage Stud System - Stairs
- ProRig Nutsert Tension Rod System (requires a swaging tool)
- ProRig Quick Lock System
- Standard DIY System for Metal Posts
- Standard DIY System for Timber Posts
- Tensioner Swage Stud System
- Tensioner Swage Stud System with Flip Toggle
- Wire Rope
- New Arrivals
- Specials
Your shopping cart is empty!
ProRig Insert Swage Stud System For Timber Stairs

The ProRig Original Design Insert Swage Stud System™ is one of our most popular streamline stainless steel wire balustrade systems for timber posts. Simply insert the Left and Right Hand Threaded Inserts into your timber posts using a standard electric drill and hex head driver bit, screw the corresponding factory swaged swage studs into the Threaded Inserts and create tension on the wire.
If you require a complete factory swaged system, order through our online Balustrade Builder or contact us directly via phone, fax or email. Your wires will arrive to your door pre-swaged to your exact measurements for a very quick and simple installation.
Please Note: This method is only suitable for timber posts.
Read FAQ and learn more about the Insert Swage Stud System here.
C-Spanner ProRig Multi Tool AISI 304
C-Spanner ProRig Multi Tool AISI 304The ProRig Multi Tool is a must have when installing any ProRig stainless steel wire balustrade system. The ProRig Multi Tool is produced from high quali..
Swivel Connector M6 LHT
Swivel Connector M6 LHT AISI 316-Imperial closest equivalent 15/64 inches (5.9531mm)Connect swage studs in wire balustrade system assemblies to metal posts using this adjustable swivel connector. Easi..
Swivel Connector M6 RHT
Swivel Connector M6 RHT AISI 316-Imperial closest equivalent 15/64 inches (5.9531mm)Connect swage studs in wire balustrade system assemblies to metal posts using this adjustable swivel connector. Easi..
Swage Stud suits 3.2mm wire M6 x 35mm LHT
Swage Stud suits 3.2mm wire M6 x 35mm LHT ProRig AISI 316Swage Stud suits 3.2mm wire M6 x35mm LHT ProRig AISI 316Miami Stainless Swage Terminals, also known as Swage Studs are manufactu..
Swage Stud suits 3.2mm wire M6 x 35mm RHT
Swage Stud suits 3.2mm wire M6 x 35mm RHT ProRig AISI 316 Miami Stainless Swage Terminals, also known as Swage Studs are manufactured from high quality forged AISI 316 mar..
Threaded Insert M6 x 32mm RHT ProRig AISI 304
Threaded Insert M6 x 32mm RHT ProRig AISI 304-Imperial closest equivalent 15/64 inches (5.9531mm) & 1 1/4 inches (31.75mm)Miami Stainless stocks the premium quality ProRig Threaded Inser..