Econ Lag Swage Bottlescrew System
Our Lag Swage Bottlescrew System is a streamline stainless steel wire balustrade systems for straight sections when using timber posts. To install the Lag Swage Bottlescrew System into timber posts, simply screw the Lag Screw and Lag Bottlescrew into your timber posts, thread the swage stud through any intermediate posts, attach the pre-swaged fittings to the Lag Bottlescrew and create tension by rotating the Bottlescrew. Please Note: It is recommended you use the extra Lag Screws supplied to pre-thread the hole before screwing in the Lag Swage Bottlescrew fittings.
To order, simply measure the distance from inside post to inside post between the starting and finishing points of your posts and provide them to Miami Stainless either through our online Balustrade Builder or contact us directly via phone, fax or email. Your wires will arrive to your door pre-swaged to your exact measurements for a very quick and simple installation.
Please Note: This method is suitable for both timber posts.
Read FAQ and learn more about the Lag Bottlescrew System here.
Lag Screw suits 3.2mm wire M6 x 40mm RHT AISI 316
Lag Screw suits 3.2mm wire M6 x 40mm RHT AISI 316 Miami Stainless M6 x 30mm Right Hand Threaded Lag Screws are high quality forged AISI 316 marine grade stainless steel ..
Drill Bit 4.0mm Sutton Viper
Drill Bit 4.0mm Sutton Viper Miami Stainless range of Sutton Viper Drill Bits are made from High Speed Steel, have a bright surface finish and are available in full and half sizes from&..
Peek Polish 100ml
Peek Polish 100ml Peek Polish range is a highly concentrated formula which removes tarnish, heat discolouration & oxidation from all metal surfaces including stainless steel, gold, silver, ..
Bottlescrew 5mm Lag/Swage suits 3.2mm wire
Bottlescrew 5mm Lag Screw/Swage to suit 3.2mm wire Econ AISI 316 A Lag/Swage Bottlescrew or Rigging Screw consists of one (1) threaded AISI 316 marine grade stainless steel Lag Screw and one (1)..
Drill Bit 7.5mm Sutton Viper
Drill Bit 7.5mm Sutton Viper 7.5mm drill bits are perfect for allowing the Swage Stud to pass through intemediate posts when installing wire balustrade systems. If you have larger di..
1x19 Wire Rope 304 Grade Stainless Steel (Per Metre)
List of all diameter wires available in 1x19 Construction by the metre. Wire Rope Brands ProRig Wire - ProRig stainless steel wire rope is produced by an outstanding Korea..
1x19 Wire Rope 316 Grade Stainless Steel (Per Metre)
List of all diameter wires available in 1x19 Construction by the metre. Wire Rope Brands ProRig Wire - ProRig stainless steel wire rope is produced by an outstanding Korea..
Factory Hydraulic Swaging
Miami Stainless factory swaging provides the cleanest and strongest connection between the stainless steel wire rope and fitting. Using the latest in swaging machinery, Miami Stainless professional s..