Tensioner Swage Stud System with Flip Toggle

Tensioner Swage Stud System with Flip Toggle


Our Tensioner Swage Stud with Flip Toggle System is a popular streamline stainless steel wire balustrade system that utilises flip toggle instead of a rod terminal. Available to suit both timber and metal posts, the Tensioner Swage Stud System with Flip Toggle is perfect for single straight or stair sections. Please Note: It is not recommended this system be used where corners exist unless the intersecting wires are offset.

To install the Tensioner Swage Stud System with Flip Toggle, pre-drill holes in posts, for flip toggle end drill a 6mm hole in the inside face only and a 9mm hole for the hex head tensioner on both sides of opposide end post. Intermediate posts require a 7.5mm hole. Insert the flip toggle end of the 6mm hole and pull the wire to lock in place. Pass the opposite end of the wire through any intermediate posts and thread into hex head tensioner inside of end post. Use a spanner and 1/4" allen key to tension wires and lock system into place.

To order, simply measure the outside distance between the starting and finishing points of your posts and provide them to Miami Stainless either through our online
Balustrade Builder or contact us directly via phone, fax or email. Your wires will arrive to your door pre-swaged to your exact measurements for a very quick and simple installation.

Please Note: This method is suitable for both timber and metal posts. It is recommended that you use a standard flat washer on each outside face of your posts when installing this system with timber posts.


Read FAQ and learn more about the Tensioner Swage Stud System here.

online balustrade quote price

Grid View:
Quickview

Swage Stud suits 3.2mm wire M6 x 40mm RHT

$2.86

Swage Stud suits 3.2mm wire M6 x 40mm RHT ProRig AISI 316 Miami Stainless  Swage Terminals , also known as  Swage Studs  are manufactured from high quality forged  ..

Quickview

Peek Polish 100ml

$12.16

Peek Polish 100ml Peek Polish range is a highly concentrated formula which removes tarnish, heat discolouration & oxidation from all metal surfaces including stainless steel, gold, silver, ..

Quickview

Swage Terminal 6.5 x 23mm suits 3.2mm Wire

$1.22

Swage Terminal 6.5mm x 23mm to suit 3.2mm Wire ProRig AISI 316 ProRig Rod Terminals suit ProRig Original Design Flip Toggle™ and ProRig Original Design Tension Rod™ stainless steel wire bal..

Quickview

6mm Hex Head Tensioner ProRig AISI 316

$2.46

Hex Head Tensioner 6mm ProRig AISI 316 -Imperial closest equivalent 15/64 inches (5.9531mm) Miami Stainless AISI 316 stainless steel 5mm Econ Hex Head Tensioners are used in conjunction..

Quickview

Drill Bit 6.0mm Sutton Viper

$6.29

Drill Bit 6.0mm Sutton Viper Miami Stainless range of Sutton Viper Drill Bits are made from High Speed Steel, have a bright surface finish and are available in full and half sizes from 3.0m..

Quickview

Drill Bit 7.5mm Sutton Viper

$9.32

  Drill Bit 7.5mm Sutton Viper 7.5mm drill bits are perfect for allowing the Swage Stud to pass through intemediate posts when installing wire balustrade systems. If you have larger di..

Quickview

Drill Bit 9.0mm Sutton Viper

$12.44

Drill Bit 9.0mm Sutton Viper Miami Stainless range of Sutton Viper Drill Bits are made from High Speed Steel, have a bright surface finish and are available in full and half sizes from 3.0mm..

Quickview

1x19 Wire Rope 304 Grade Stainless Steel (Per Metre)

$4.50

List of all diameter wires available in 1x19 Construction by the metre. Wire Rope Brands  ProRig Wire -  ProRig stainless steel wire rope is produced by an outstanding Korea..

Quickview

1x19 Wire Rope 316 Grade Stainless Steel (Per Metre)

$0.50

List of all diameter wires available in 1x19 Construction by the metre. Wire Rope Brands  ProRig Wire -  ProRig stainless steel wire rope is produced by an outstanding Korea..

Quickview

Flip Toggle for 3.2mm Wire ProRig AISI 304

$1.94

Flip Toggle for 3.2mm Wire - ProRig AISI 304 ProRig Original Design Flip Toggle™ is a high quality AISI 304 stainless steel component which revolutionises traditional streamline stainless steel w..

Quickview

Factory Hydraulic Swaging

$2.76

Miami Stainless factory swaging provides the cleanest and strongest connection between the stainless steel wire rope and fitting.  Using the latest in swaging machinery, Miami Stainless professional s..

Showing 1 to 11 of 11 (1 Pages)