Econ Jaw Swage Bottlescrew System for Metal Posts
Our Jaw Swage Bottlescrew System is one of our most popular streamline stainless steel wire balustrade systems for stair or angled sections. Available to suit both timber and metal posts, the Jaw Swage Bottlescrew System is perfect for high use areas where children, pets or guests may pull on the wires.
To install the Jaw Swage Bottlescrew System into metal posts simply insert the right hand threaded and Blind Nut Rivets or Nutserts into your metal posts, screw in the Eye Bolts, attach the pre-swaged fittings at the end of each wire by siding the pin through the Eye Bolt and create tension by rotating the Bottlescrew using a ProRig C-Spanner.
To order, simply measure the distance from inside post to inside post between the starting and finishing points of your posts and provide them to Miami Stainless either through our online Balustrade Builder or contact us directly via phone, fax or email. Your wires will arrive to your door pre-swaged to your exact measurements for a very quick and simple installation.
Please Note: This method is only suitable for metal posts.
C-Spanner Econ Tool AISI 304
C-Spanner Econ Tool AISI 304 Suitable for use in tightening M5 bottlescrews / rigging screws...
Nut Rivet Insert Tool HD suits rivets M4 to M10
Nut Rivet Insert Tool (Nutsert) Heavy Duty suits rivets M4 to M10 This heavy trade duty Nut Rivet Insert Tool is suitable for rivets from M4 to M10. Miami Stainless HN-02 ..
3.2mm Wire Rope 1x19 ProRig AISI 316 - per Metre
Wire Rope 3.2mm 1 x 19 ProRig AISI 316 Per Metre -Imperial closest equivalent 1/8 inches (3.175mm) Miami Stainless supplies an ultra-high quality ProRig 316 marine grade Stainl..
3.2mm Wire Rope Econ 1x19 AISI 316 per Metre
Wire Rope 3.2mm 1 x 19 Econ AISI 316 PER METRE -Imperial closest equivalent 1/8 inches (3.175mm) Miami Stainless supplies a high quality Econ 3.2mm 1 x 19, 316 marine grade St..
Drill Bit 4.0mm Sutton Cobalt
Drill Bit 4.0mm Sutton Cobalt Miami Stainless range of Sutton Cobalt Drill Bits are made from cobalt, have a colour tempered surface finish and are available in full and half..
Peek Polish 100ml
Peek Polish 100ml Peek Polish range is a highly concentrated formula which removes tarnish, heat discolouration & oxidation from all metal surfaces including stainless steel, gold, silver, ..
5mm ECON Bottlescrew Jaw/Swage suits 3.2mm wire
Bottlescrew 5mm Jaw/Swage to suit 3.2mm wire Econ AISI 316 -Imperial closest equivalent 3/16 inches (4.7625mm) suits wire 1/8 inches (3.175mm) A Jaw/Swage ..
Fork Terminal 5mm Pin suits 3.2mm Wire Econ
Fork Terminal 5mm Pin to suit 63.2mm Wire Econ AISI 316 Miami Stainless Fork Terminals are cast AISI 316 marine grade stainless steel and designed to attach stainless steel wire ro..
Blind Nut Rivet M6 RHT 0.7 - 4.0mm Grip
Blind Nut Rivet (Nutsert) M6 Grip Range 0.7mm to 4.0mm RHT AISI 304 Miami Stainless 6mm Blind Nut Rivets, or Nutserts, are AISI 304 stainless steel and the perfect solution to any stainless steel..
Eye Bolt Metal Thread M6 x 12mm ProRig AISI 316
Eye Bolt M6 x 12mm Metal Thread AISI 316 -Imperial closest equivalent 1/4 inches (6.35mm)x 15/32 inches (11.9063mm) Miami Stainless M6 x 12mm Eye Bolts are made from high quali..
Drill Bit 10.0mm Sutton Cobalt
Drill Bit 10.0mm Sutton Cobalt Miami Stainless range of Sutton Cobalt Drill Bits are made from cobalt, have a colour tempered surface finish and are available in full and hal..