Free delivery on orders over $500*

Cart

Standard DIY System for Timber Posts

Our Standard DIY Timber System suits timber and metal posts and is a true Do-It-Yourself kit supplied with stainless steel fittings and wire rope only for installation on site.  Although this system has a much more involved and time consuming installation process, it is ideal for those on a strict budget. The Standard DIY Timber System comes with simple step-by-step instructions to guide you through the installation process.

To order, simply calculate the amount of wire you need by measuring the distance between the starting and finishing points of your posts and then provide this information, along with the qualtity of fittings, to Miami Stainless either through our online Balustrade Builder or contact us directly via phone, fax or email. Your Standard DIY System will arrive at your door in kit form ready for a quick and simple installation.

Please Note: This method is suitable for timber and metal posts.

Shop System

Standard DIY System Timber Instruction Sheet

Installation instructions for the Standard DIY wire balustrade system for timber posts.

Download

FAQ about Standard DIY System for Timber Posts

Can I install this method myself?

Yes, even someone with no experience can easily install all our wire balustrade systems.

Do I need any special tools?

Other than common handyman tools such as an electric drill and drill bits you will need a Hand Swaging Tool and a set of Wire Rope Cutters. You can purchase these tools and drill bits for easy installation of this system if required.

What size and type of stainless steel wire do I use?

 This method is almost always used with 3.0mm 7 x 7 stainless steel wire rope. This wire is the most functional for stainless steel wire balustrade systems due to its bright surface finish, attractive appearance, durability, strength and low stretch.

What spacing do I need between my wires?

When using 3.0mm 7 x 7 stainless steel wire, you will usually need 80mm spacing (usually 11 runs) between your wires when using a standard one (1) meter high handrail. Please click here for more information on the current NCC Wire Balustrade Regulations.

Can I use this balustrade system on a stair or angled section?

Yes, the Standard DIY System suits stair and angled sections.

What is the maximum length run I can do?

The Standard DIY System can easily span up to 10 meters. Longer runs of up to 16 meters can be achieved when using a Tensioner at each end. Please contact Miami Stainless for further information.

What size hole should I drill through my intermediate posts?

A 4.0mm hole through your intermediate posts will allow the stainless steel wire to pass through. Please note: If you are using grommets, the required drill size is 11/32″.

Can I take my balustrade wire around corners?

Miami Stainless highly recommends that you do not bend your wire around corners; this can fatigue the wire, put excessive stress on your posts, and make it difficult to get the required tension on your wire to meet NCC Regulations.

Can I use this method if I have timber posts?

Yes, you can use this system with timber posts. Simply use screws to fasten the Saddles to your posts.

Can I use this method if I have metal posts?

Yes, you can use this system with timber posts. Simply use Blind Rivets to fasten the Saddles to your posts.

What do I need to get a quote?

To get a free, no obligation quote you will need to know how many sections you require and the length of each section. You will also need the height of your handrail between your decking or platform and the underside of your handrail.  You can use the Miami Stainless Balustrade Builder to compare different wire balustrade systems at your convenience or contact us directly here.

How do I order?

Simply follow the steps using the Miami Stainless Balustrade Builder and make a secure payment by credit card or you can contact us directly here.

If you contact Miami Stainless directly we require your exact measurements from the inside to inside face of your posts to be supplied in writing.

How much will freight cost me and when can I expect delivery?

The Standard DIY System is usually dispatched the day* full payment is received.

Free delivery for orders over $500 excl GST. *Exclude Western Australia, Nothern Territory and Tasmania – $40 flat fee. Bulky, oversize, or overweight packages may incur extra freight charges. Delivery charges exclude handrail tube – price on application. Delivery times may vary.

Please note: Miami Stainless offers an Air Freight service for packages under 5kg. Please contact us for further information.