Our Tensioner Swage Stud System is a popular streamline stainless steel wire balustrade system that passes through both sides of a post. Available to suit both timber and metal posts, the Tensioner Swage Stud System is perfect for single straight or stair sections. Please Note: It is not recommended this system be used where corners exist unless the intersecting wires are offset.
To install the Tensioner Swage Stud System, drill through your posts, feed the Swage Stud end of the pre-swaged wire through the finishing post and any intermediate posts then through the starting post and fasten the Tensioner to create the required tension.
To order, simply measure the outside distance between the starting and finishing points of your posts and provide them to Miami Stainless either through our online Balustrade Builder or contact us directly via phone, fax or email. Your wires will arrive to your door pre-swaged to your exact measurements for a very quick and simple installation.
Please Note: This method is suitable for both timber and metal posts. It is recommended that you use a standard flat washer on each outside face of your posts when installing this system with timber posts.
Read FAQ and learn more about the Tensioner Swage Stud System here.
Thousands of products from the highest quality stainless steel and hardware manufacturers.
